Lambert Corporation
PRODUCTS
(listed by CSI Section #)
Open a New Window...
All Products
Contact Us
Color Charts
Resource Center
--Color Calculation
--F.A.Q.
--Specs & MSDS
--Literature
--Brochure-all products
--Product Games
Map to Lambert
Section heads link to CSI 3 part specification in .pdf format
You must have
Adobe Acrobat 5 or higher
to view.
Earlier versions of the program will
not
open these files!
If needed, download the free reader here:
>
Text changes to RED if link is available
<
DIVISION 2: SITE WORK
•
02750: RIGID PAVEMENT
•
02775: SIDEWALKS
Form Release WB
general purpose low-VOC form release
Form Release Gold
premium grade form release
Lambco® Powder Release
dust-on release agent for stamped/imprinted concrete
Lambco® Color
dry cement and mortar color pigment
Aqua Kure - Clear
dissipating low-VOC cure; clear or w/fugitive dye (ASTM C-309)
Clear ColorSeal
clear cure & seal
for integrally colored concrete
EMAG-20
non-slip aluminum oxide emery aggregate
Colorbrite®
(colored surface hardener)
emery aggregate dry-shake colored surface hardener
Colorhard
(colored surface hardener)
quartz aggregate dry-shake colored surface hardener
Acrylbond
acrylic bonding agent (non-rewettable)
Epiweld® 560 (gel)
lo-mod epoxy adhesive; moisture insensitive resin
Epiweld® 580
hi-mod epoxy adhesive; moisture insensitive resin
DIVISION 3: CONCRETE
•
03050: BASIC MATERIALS & METHODS
•
03300: CAST-IN-PLACE
•
03360: CONCRETE FINISHES
•
03390: CONCRETE CURING
Form Release WB
general purpose low-VOC form release
Form Release Gold
premium grade form release
Lambco® Color
dry cement and mortar color pigment
EMAG-20
non-slip aluminum oxide emery aggregate
Colorbrite®
(colored surface hardener)
emery aggregate dry-shake colored surface hardener
Colorhard
(colored surface hardener)
quartz aggregate dry-shake colored surface hardener
Solidus®
liquid chemical hardener; surface treatment
Lambco® Text
slip resistive additive for Lambco Stain, Plexgard and sealers
Acrylbond
acrylic bonding agent (non-rewettable)
Hibond®
PVA bonding agent (rewettable)
Epiweld® 560 (gel)
lo-mod epoxy adhesive; moisture insensitive resin
Epiweld® 580
hi-mod epoxy adhesive; moisture insensitive resin
Lambco® Skin
evaporation retarder
Gardseal
penetration curing compound & chemical hardener
Colorgard
pigmented cure-and-seal for integrally colored concrete
Aqua Kure
dissipating low-VOC cure (ASTM C-309)
Crystal Clear® Seal 1315
cure & seal (ASTM C-309 & C-1315, Class B)
Glazecote 20
cure & seal (ASTM C-309)
Glazecote 30
cure & seal (ASTM C-309 & C-1315, Class B)
Crystal Gard 0800
cure & seal; Fed Specs, TT-C-0800 30% cure
UV Safe Seal
cure & seal; (ASTM C-309 & C-1315, Class A)
UV Super Seal
cure & seal; (ASTM C-309 & C-1315, Class A)
•
03500: CEMENTITIOUS DECKS & UNDERLAYMENT
Lambco® Self-Level
fast-set polymer modified portland cement leveling compound
•
03600: GROUT
Vibropruf® #11
high-strength, non-metallic, non-shrink grout
Vibropruf® #20
premium quality, non-metallic, non-shrink grout
Epiweld® 9-N-7
epoxy grout system; quartz aggregate
Lambco® Anchor Sement
portland cement based anchor cement
Super Por-Rok®
portland cement based anchor cement
Por-Rok®
gypsum cement based anchor cement
•
03900: CONCRETE RESURFACING
Rapid Set Grout®
fast-setting, high strength, non-shrink grout
Lambco® L-16 Self-Level
fast-set polymer modified portland cement leveling compound
Sement Patch System
2-part repair system
Lambco® Vinyl Patch
1-part patch / repair compound; trowel grade
Lambco® Fast Patch
1-part patching compound; nonsag
Lambco® Plug
non-heat genrating hydraulic cement/waterproof cement plug patching compound
White Plug
white hydraulic cement
ReNew Coat
1-part thin cementitious surfacing system
Acrylbond
acrylic bonding agent (non-rewettable)
DIVISION 4: MASONRY
•
04050: BASIC MATERIALS & METHODS
Lambco® Color
dry cement and mortar color pigment
Vibropruf® #11
high-strength, non-metallic, non-shrink grout
Vibropruf® #20
premium quality, non-metallic, non-shrink grout
DIVISION 7: THERMAL AND MOISTURE PROTECTION
•
07110: DAMPPROOFING
Waterban
®
60
asphalt emulsion dampproofing (water-based)
•
07190: WATER REPELLENTS
Exposite SB
high-build solvent-based clear acrylic sealer
Exposite WB
low-VOC clear acrylic emulsion sealer
Waterban® 90
siloxane water repellent; 15% solids
DIVISION 9: FINISHES
•
09220: PORTLAND CEMENT PLASTER
Acrylbond
acrylic bonding agent (non-rewettable)
Hibond®
PVA bonding agent (rewettable)
•
09980: COATINGS - CONCRETE & MASONRY
Plexgard
water-based acrylic concrete floor coating
Lambco® Colorcoat
solvent-based penetrating concrete coating
(formerly Stain SB)
Epiweld® C-200
protective coal-tar epoxy coating
Crystal Clear® Seal - Gray
cure & seal; gray pigmented styrene/acrylic (ASTM C-309)
Lambco® Text
slip resistive additive for Lambco Colorcoat, Plexgard & sealers
Acrobat 5
is required for viewing Spec, MSDS, and other
4
pdf documents! Earlier versions of the reader will
not
work!
Visit the
F.A.Q. page
for assistance with viewing literature.
Denotes a waterbased product, more environmently friendly
Denotes a high VOC content item, not available in all states.
UV SUPER SEAL and other higher VOC sealers are not for sale in: California, New York and Pennsylvania.
Seeking a Lambert product and can't find it?
Check our suggested
alternatives
page.
Is there something you would like to see on our website?
(MSDS & SPECS are in process of being added)
Please send us a
webform
with your suggestion.
Product list by Type
|
F.A.Q
|
Contact Lambert
|
Resource Center
|
Prosoco Products
|
Curbing
|
©2001-2008 Lambert Corporation - All rights reserved