CURE & SEALS    

CRYSTAL CLEAR SEAL - 1315
VOC COMPLIANT

High solids, clear cure-and-seal that will dustproof concrete surfaces.  A tough, wear-resistant sealer that dries to a glossy sheen.  May be used on new or old concrete, interior or exterior.  Compatible with most adhesives used for resilient flooring or carpet installations.  

ASTM C-1315, Type 1, Class B
ASTM C-309, Type 1, Class A/B
AASHTO M-148, Type 1,Clear
NAVDOCS SPEC 13 YF
USDA approved for incidental food contact
Coverage:   Coverage ranges from 200 to 350 sf/gal (4.9 to 8.6 m²/liter) depending on the type of form and porosity of the concrete surface.
- Compliance with ASTM C-1315 requires application at 300 sf/gal (7.4m²/liter).
- Compliance with ASTM C-309 requires application at 200 sf/gal (4.9m²/liter).

CRYSTAL CLEAR SEAL 1315
Packaging:
Available in 55 gal. (208 liter) drums,
5 gal. (19 liter) pails, and
case of four 1 gal (3.8 liter) plastic jugs.   


CRYSTAL CLEAR SEAL GRAY   
For gray tinted finish
Packaging:
Available in 5 gal. (19 liter) pails only


 Acrobat 5 or higher is required for viewing MSDS & SPECS - approx 30 secs to load.
 Earlier versions of the reader will not work.




Product list by Type | F.A.Q | Contact Lambert | Resource Center | Prosoco Products | Curbing |
©2001-2010 Lambert Corporation - Orlando, Florida - All rights reserved