GROUT/ANCHOR CEMENTS

POR-ROK

Nonshrink gypsum cement anchor for interior applications or well-protected exterior applications. In a ready-to-use formulation, POR-ROK achieves a compressive strength in excess of 62 MPa (9,000 psi). Initial set occurs in 15 minutes and a final set in 45 minutes. Packaging: Available in 50 lb (22.7 kg) pails
Coverage: Typically, 100 lbs (45 kg) will yield approximately 1 cu. ft. (0.03 m³) of anchor cement

Acrobat 5 is required for viewing - approx 30 secs to load.

Earlier versions of the reader will not work.

Important Notice!

Por-Rok is not designed for exterior applications that can get wet!

Water causes expansion and blowout as shown in these images.

Use Super Por-Rok for these applications!