ALL PRODUCTS

   





4 These documents are in .pdf format
You must have Adobe Acrobat 5 or higher  to view.    
 Earlier versions of the program will not open these files!
If needed, download the free reader here:



 > Text changes to RED if link is available <
1.
&
Integral Pigment Color Selection Chart
cement and mortar color pigment
liquid carbon black color additive
4
colored concrete sidewalk specification
2.
&
Plexgard-Colorcoat-Colorbrite-Colorhard
water-based acrylic concrete floor coating
solvent-based penetrating concrete coating (formerly Stain SB)
3.
Colorbrite® (colored surface hardener)
emery aggregate dry-shake colored surface hardener
Colorhard  (colored surface hardener)
quartz aggregate dry-shake colored surface hardener
non-slip aluminum oxide emery aggregate
dust-on / dry-shake iron aggregate surface hardener
liquid concrete accelerator; hardening additive
liquid chemical hardener; surface treatment
4
concrete finishing specification
4.
4
Properties of Resurfacing Products
1-part patching compound; nonsag
1-part patching compound; superior workability
waterproof cement plug patching compound - no chlorides!
white hydraulic cement
NEW!
Lambco® Tilt Coat   New Product
portland cement blend produces a creamy compound
1-part thin cementitious surfacing system
fast-set polymer modified portland cement leveling compound
2-part repair system
1-part patch / repair compound; trowel grade
water-based decorative concrete finishing system
4
portland cement underlayment specification
4
concrete resurfacing specification
5.
LATEX BONDING AGENTS
4
Properties of Latex Bonding Agents
acrylic bonding agent (non-rewettable)
PVA bonding agent (rewettable)
general purpose PVA bonding agent (rewettable)
economic bonding agent (rewettable)
rewettable product that meets requirements of ASTM C-932
Primer L-16    (see L-16 Self Level page)
bonding agent for use with L-16 Self Level Underlayment only
EPOXY PRODUCTS
Epiweld® C-200    Unavailable at this time
protective coal-tar epoxy coating
epoxy gel adhesive; dual cartridge system (2 different sizes)
crack injection repair epoxy; 17-fl.oz. (500ml) dual cartridge
lo-mod epoxy adhesive; moisture insensitive resin
hi-mod epoxy adhesive; moisture insensitive resin
hi-mod nonsag epoxy adhesive
hi-mod general purpose epoxy adhesive
epoxy grout system; quartz aggregate
6.
4
Properties of Water Repellent Sealers
high-build solvent-based clear acrylic sealer
low-VOC clear acrylic emulsion sealer
siloxane water repellent; 15% solids
7.
general purpose low-VOC form release
general purpose form release
premium grade form release
liquid stamp release, alternative to dry powder release
dust-on release agent for stamped/imprinted concrete
8.
DAMPPROOFING PRODUCTS
asphalt emulsion dampproofing (water-based)
4
dampproofing specification
WATERPROOFING PRODUCTS
NEW!
Waterban® 55   New Product
latex-modified asphalt-emulsion waterproof coating
NEW!
Waterban® 75   New Product
polymer-modified asphalt-emulsion waterproofing coating for precast concrete
9.
low-cost, non-metallic, non-shrink grout
high-strength, non-metallic, non-shrink grout
premium quality, non-metallic, non-shrink grout
portland cement based anchor cement (was Lambco Flow Rock)
portland cement based anchor cement (by Por-Rok Sta-Dri)
gypsum cement based anchor cement (by Por-Rok Sta-Dri)
fast-setting, high strength, non-shrink grout (11,000 psi)
10.
CURING COMPOUNDS                
4
Cure Selection Considerations
dissipating low-VOC cure; clear or w/fugitive dye (ASTM C-309)
dissipating low-VOC cure; white pigmented (ASTM C-309)
WB
cure & seal; low-VOC styrene/acrylic (ASTM C-309)
WB
cure & seal; low-VOC styrene/acrylic (ASTM C-309 & C-1315)
WB
cure & seal; non-yellowing acrylic (ASTM C-309 & C-1315)
Crystal Clear® Seal 1315                                   
SB
cure & seal; standard styrene/acrylic (ASTM C-309 & C-1315)
SB
cure & seal; gray pigmented styrene/acrylic (ASTM C-309)
SB
cure & seal; heavy industrial strength (ASTM C-309 & C-1315)
penetration curing compound & chemical hardener
cure & seal; non-yellowing acrylic (ASTM C-309 & C-1315)
clear cure & seal for integrally colored concrete
pigmented cure-and-seal for integrally colored concrete
4
concrete curing specification
evaporation retarder
slip resistive additive for Lambco Colorcoat, Plexgard & sealers
colorless aromatic hydrocarbon solvent
colorless aromatic hydrocarbon solvent
citrus-oil based concrete cleaner and degreaser
PROSOCO PRODUCTS distributed by Lambert Corporation
       Acrobat 5 is required for viewing Spec, MSDS, and other 4pdf documents!  Earlier versions of the reader will not work!
Visit the F.A.Q. page for assistance with viewing literature.


Denotes a waterbased "green" product
 Denotes a high VOC content item, not available in all states.
UV SUPER SEAL and other higher VOC sealers are not for sale in: California, New York and Pennsylvania.



 Seeking a Lambert product and can't find it?



Lambert has the following printed material available on request.

If you would like to receive a copy of printed text,
please contact us via email, phone or fax and let us know:

A full product brochure (12 page quick reference guide)
(also can be viewed and printed online: here)
Concrete in Colors - integral concrete color chart  &
Surface applied colors chart  &
Hardbound Catalog (with all the Spec sheets)
Individual MSDS & SPEC Sheets




                       
Product list by Type | F.A.Q | Contact Lambert | Resource Center | Prosoco Products | Curbing |
©2001-2008 Lambert Corporation - All rights reserved