PRODUCTS (listed by CSI Section #)
|
||
 Section heads link to CSI 3 part specification in .pdf formatYou must have Adobe Acrobat 5 or higher to view.
Earlier versions of the program will not open these files!
|
If needed, download the free reader here:
 |
|
|
|
> Text changes to RED if link is available <
|
DIVISION 2: SITE WORK
|
|||
|
•
|
02750: RIGID PAVEMENT
|
|
|
•
|
02775: SIDEWALKS 3 part spec
|
|
|
 |
general purpose low-VOC form release
|
|
|
|
premium grade form release
|
|
|
|
dust-on release agent for stamped/imprinted concrete
|
|
|
|
dry cement and mortar color pigment
|
|
|
|
dissipating low-VOC cure; clear or w/fugitive dye (ASTM C-309)
|
|
|
|
clear cure & seal for integrally colored concrete
|
|
|
|
non-slip aluminum oxide emery aggregate
|
|
|
|
Colorbrite® (colored surface hardener)
|
emery aggregate dry-shake colored surface hardener
|
|
|
Colorhard (colored surface hardener)
|
quartz aggregate dry-shake colored surface hardener
|
|
|
acrylic bonding agent (non-rewettable)
|
|
|
|
lo-mod epoxy adhesive; moisture insensitive resin
|
|
|
|
hi-mod epoxy adhesive; moisture insensitive resin
|
|
DIVISION 3: CONCRETE
|
|||
|
•
|
03050: BASIC MATERIALS & METHODS
|
|
|
•
|
03300: CAST-IN-PLACE
|
|
|
•
|
03360: CONCRETE FINISHES 3 part spec
|
|
|
•
|
03390: CONCRETE CURING 3 part spec
|
|
|
|
general purpose low-VOC form release
|
|
|
|
premium grade form release
|
|
|
|
dry cement and mortar color pigment
|
|
|
|
non-slip aluminum oxide emery aggregate
|
|
|
|
Colorbrite® (colored surface hardener)
|
emery aggregate dry-shake colored surface hardener
|
|
|
Colorhard (colored surface hardener)
|
quartz aggregate dry-shake colored surface hardener
|
|
|
liquid chemical hardener; surface treatment
|
|
|
|
slip resistive additive for Lambco Stain, Plexgard and sealers
|
|
|
|
acrylic bonding agent (non-rewettable)
|
|
|
|
PVA bonding agent (rewettable)
|
|
|
|
lo-mod epoxy adhesive; moisture insensitive resin
|
|
|
|
hi-mod epoxy adhesive; moisture insensitive resin
|
|
|
|
evaporation retarder
|
|
|
|
penetration curing compound & chemical hardener
|
|
|
|
pigmented cure-and-seal for integrally colored concrete
|
|
|
|
dissipating low-VOC cure (ASTM C-309)
|
|
|
 |
cure & seal (ASTM C-309 & C-1315, Class B)
|
|
|
|
cure & seal (ASTM C-309)
|
|
|
|
cure & seal (ASTM C-309 & C-1315, Class B)
|
|
|
|
cure & seal; Fed Specs, TT-C-0800 30% cure
|
|
|
|
cure & seal; (ASTM C-309 & C-1315, Class A)
|
|
|
|
cure & seal; (ASTM C-309 & C-1315, Class A)
|
|
|
•
|
03500: CEMENTITIOUS DECKS & UNDERLAYMENT
|
|
|
|
fast-set polymer modified portland cement leveling compound
|
|
|
•
|
03600: GROUT
|
|
|
|
high-strength, non-metallic, non-shrink grout
|
|
|
|
premium quality, non-metallic, non-shrink grout
|
|
|
|
epoxy grout system; quartz aggregate
|
|
|
|
portland cement based anchor cement
|
|
|
|
portland cement based anchor cement
|
|
|
|
gypsum cement based anchor cement
|
|
|
•
|
03900: CONCRETE RESURFACING 3 part spec
|
|
|
|
fast-setting, high strength, non-shrink grout
|
|
|
|
fast-set polymer modified portland cement leveling compound
|
|
|
|
2-part repair system
|
|
|
|
1-part patch / repair compound; trowel grade
|
|
|
|
1-part patching compound; nonsag
|
|
|
|
non-heat genrating hydraulic cement/waterproof cement plug patching compound
|
|
|
|
white hydraulic cement
|
|
|
|
1-part thin cementitious surfacing system
|
|
|
|
acrylic bonding agent (non-rewettable)
|
|
DIVISION 4: MASONRY
|
|||
|
•
|
04050: BASIC MATERIALS & METHODS
|
|
|
|
dry cement and mortar color pigment
|
|
|
|
high-strength, non-metallic, non-shrink grout
|
|
|
|
premium quality, non-metallic, non-shrink grout
|
|
DIVISION 7: THERMAL AND MOISTURE PROTECTION
|
|||
|
•
|
07110: DAMPPROOFING 3 part spec
|
|
|
|
asphalt emulsion dampproofing (water-based)
|
|
|
•
|
07190: WATER REPELLENTS
|
|
|
|
high-build solvent-based clear acrylic sealer
|
|
|
|
low-VOC clear acrylic emulsion sealer
|
|
|
|
siloxane water repellent; 15% solids
|
|
|
•
|
09980: COATINGS - CONCRETE & MASONRY
|
|
|
|
water-based acrylic concrete floor coating
|
|
|
|
solvent-based penetrating concrete coating (formerly Stain SB)
|
|
|
|
protective coal-tar epoxy coating
|
|
|
|
cure & seal; gray pigmented styrene/acrylic (ASTM C-309)
|
|
|
|
slip resistive additive for Lambco Colorcoat, Plexgard & sealers
|
|
Acrobat 5 is required for viewing Spec, MSDS, and other 4pdf documents! Earlier versions of the reader will not work!
Visit the F.A.Q. page for assistance with viewing literature.
| CSI 3 part specification in .pdf format Denotes a waterbased product, more environmently friendly Denotes a high VOC content item, not available in all states. UV SUPER SEAL and other higher VOC sealers are not for sale in: California, New York and Pennsylvania.
|
Seeking a Lambert product and can't find it?
Check our suggested alternatives page.
|
©2001-2010 Lambert Corporation - Orlando, Florida - All rights reserved 