	RESURFACING PRODUCTS
RENEW COAT

See Gallery for example photos.

A high quality, pre-packaged, thin cementious repair and resurfacing material requiring only water to mix. Designed for interior and exterior use, the special additives give a fast set: open to foot traffic in 2 to 3 hours and vehicle traffic in 24 to 36 hours. Creates a “like new” appearance.

Available in two formulas!

Renew Coat C - COARSE (formerly broom finish)

Heavier grit for thicker applications

Renew Coat F - FINE (formerly hard trowel finish)

Finer grit for smooth finish to feather edge

Packaging:

Available only in 40 lbs. (18.1 kg), 5 gal. (19 liter) pail.

Coverage:

Trowel method:

Broom method:

Squeegee method:

60-80 sq ft

70-90 sq ft

up to 100 sq ft

Acrobat 5 or higher is required for viewing - approx 30 secs to load.

Earlier versions of the reader will not work.

GALLERY

Application: Broom Finish

Application: Hard Trowel

For best application, please make sure the surface has been throughly pressurewashed.

A sponge float can also be used in finishing the surface.

______________

Specific example: a new subdivision in Orlando, Florida

Before the new drive had cured, neighborhood children wrote in it and damaged it by riding bikes through it.

Renew Coat is applied as a skim coat to the full surface of the driveway.

After application complete, drive cures to hard new surface. House is ready for sale.

(Photo taken during curing process)

Product list by Type | F.A.Q | Contact Lambert | Resource Center | Prosoco Products | Curbing |

©2001-2010 Lambert Corporation - Orlando, Florida - All rights reserved